» Monopolar Cut (Pure)
» Monopolar Cut (Blend)
» Monopolar Cut (Pulsed Cut)
» Bipolar Coagulation (Manual Bipolar)
» Monopolar Coagulation (Forced)
» Monopolar Coagulation (Fulguration)
» Monopolar Coagulation (Pulsed Spray)
» Bipolar Coagulation
» Automatic Self Checking (Spotting the system’s internal problems)
» 30 Programmable memory locations
» Intelligent power control

	Mode	Max. Power (w)	Rated Load (Ohms)	Max P-P Voltage (V)	Typical Crest Factor *
Monopolar Cut	Pure Blend Pulsed Cut	120 100 150	600 600 600	1470 2640 1490	1.7 2.7 1.7
Monopolar Coag.	Forced Fulguration Pulsed Spray	100 25 25	600 600 600	2300 2870 2870	3.9 5.5 5.5 **
Bipolar Coag.		50	250	700	1.75

Note: Nominal Frequency is 2 MHz
* Crest Factor is a measurement of waveform which increases by increasing waveform coagulation capabilities and is calculated from the following equation: C.F = Vpeak/Vrms
** According to power adjustment

» Monopolar Handle (Disposable)
» Dual Pad - Patient Plate (Disposable)
» Cable for Patient Plate
» Monopolar Electrodes
» Dual Channel Footswitches
» Bipolar Forceps
» Bipolar Cable