» Argon Plasma Coagulation (Continuous Output)
» Argon Plasma Coagulation (Pulsed Output)
» Argon Plasma Cut
» Vessel Sealing (Seal 1)-Permanent sealing up to 7mm
» Vessel Sealing (Seal 2)-Permanent sealing up to 7mm
» Bipolar Cut
» Bipolar Coagulation (Auto-Start Bipolar & Manual Bipolar)
» Monopolar Cut (Pure)
» Monopolar Cut (Blend1)
» Monopolar Cut (Blend2)
» Monopolar Cut (Blend3)
» Monopolar Coagulation (Swift)
» Monopolar Coagulation (Forced)
» Monopolar Coagulation (Spray)
» Monopolar Coagulation (Soft)
» TUR Mode
» Automatic Self Checking (Spotting the system’s internal problems)
» Permanent HF Leakage current control
» Auto Stop Mode for Optimum tissue Coagulation (Preventing tissue Carbonization)
» Utilizing a microprocessor system to control the current in vessel sealing, based on measuring the impedance of the tissue
» Permits two surgeons to coagulate at the same time independently in Spray Mode
» Connect two Monopolar & Bipolar foot switching devices independently
» 75 Programmable memory locations

» Main Voltage: 220 VAC ± 10%, 50 Hz or 110 VAC ± 10%, 50~60 Hz
» Maximum Power Consumption: 800 V.A
» Protection Class: Class I
» Type of Output: CF
» Weight: 8 kg
» Dimensions (W.H.D): 44 x 17 x 40 cm

» Faster and more efficient coagulation
» Less tissue damage
» Flexible eschar creation on tissue surface
» Limited coagulation depth to approximately 2mm, resulting in minimum perforation risk
» Uniform wide-area coagulation
» Less smoke, no unpleasant odors
» Less risks of infection
» Non-contact coagulation with no adhesion between tissue and applicator
» Helpful in open surgeries and endoscopic procedures

» Two Channels Monopolar Handle (Disposable)
» Dual Pad - Patient Plate (Disposable)
» Cable for Patient Plate
» Monopolar Electrodes
» Dual Channel Footswitches (Monopolar)
» Bipolar Footswitch
» Bipolar Forceps
» Bipolar Cable

» Argon Plasma Coagulation (Continuous Output)
» Argon Plasma Coagulation (Pulsed Output)
» Argon Plasma Cut
» Bipolar Cut
» Bipolar Coagulation (Auto-Start Bipolar & Manual Bipolar)
» Monopolar Cut (Pure)
» Monopolar Cut (Blend1)
» Monopolar Cut (Blend2)
» Monopolar Cut (Blend3)
» Monopolar Coagulation (Swift)
» Monopolar Coagulation (Forced)
» Monopolar Coagulation (Spray)
» Monopolar Coagulation (Soft)
» TUR Mode
» Automatic Self Checking (Spotting the system’s internal problems)
» Permanent HF Leakage current control
» Auto Stop Mode for Optimum tissue Coagulation (Preventing tissue Carbonization)
» Utilizing a microprocessor system to control the current in vessel sealing, based on measuring the impedance of the tissue
» Permits two surgeons to coagulate at the same time independently in Spray Mode
» Connect two Monopolar & Bipolar foot switching devices independently
» 75 Programmable memory locations

» Faster and more efficient coagulation
» Less tissue damage
» Flexible eschar creation on tissue surface
» Limited coagulation depth to approximately 2mm, resulting in minimum perforation risk
» Uniform wide-area coagulation
» Less smoke, no unpleasant odors
» Less risks of infection
» Non-contact coagulation with no adhesion between tissue and applicator
» Helpful in open surgeries and endoscopic procedures

» Two Channels Monopolar Handle (Disposable)
» Dual Pad - Patient Plate (Disposable)
» Cable for Patient Plate
» Monopolar Electrodes
» Dual Channel Footswitches (Monopolar)
» Bipolar Footswitch
» Bipolar Forceps
» Bipolar Cable